A rain barrel is often overlooked as being bulky and providing little real use except to collect the rain. A rain barrel can often be a source of things like a sprinkler system with a little work and time which will save you money on your water bill. Everyday there are gallons of water that is collected by a rain barrel and then dumped or never used again. You can actually put that water to good use and provide yourself with an excellent sprinkler system which will save you time and money in the long run. Using a rain barrel as a sprinkler system is fairly easy and it does not require much effort or tools.
To use your rain barrel as a sprinkler system you are going to need just a few different materials to get started. You will need the rain barrel, a water hose, downspout divert, concrete blocks and a soaker hose. You can get all of these materials at your local hardware store or improvement store for about 30 dollars. Once you have collected all of your materials from the store then you can start working on your rain barrel sprinkler system.
The first thing you want to do to make your rain barrel sprinkler system is to install the downspout divert. You should use a downspout that is close to where you want to place the rain barrel but you do not have to be right beneath the downspout. A lot of downspouts use a hose to divert the water so you just have to make sure that the rain barrel is close enough to collect the water.
Place the rain barrel in a desired location of your choosing, this can either be in the open or you can conceal it. If you have a rain barrel you are proud of that you designed or created then you might want to leave it in the open rather than conceal it behind a shed or tree. This is the time where you would use the concrete blocks to attach the rain barrel so that the water flow is better.
The plumbing is the next step to design your rain barrel sprinkler system and it is fairly simple. A lot of the time you can get a plumbing kit with your rain barrel but if you did not then you can get one at a home improvement store for about 20 dollars. The faucet needs to go on the base of the rain barrel and it should still be accessible from that location. You want to make sure the faucet is still accessible from the bottom of the rain barrel because the rain barrel will hold a lot of rain which means it will be pretty heavy.
The watering system should be ran next which probably means you will need to install the soaker hose. A rain barrel will probably not have enough water pressure to function as a sprinkler system by itself so the soaker hose will help. The soaker hose also helps cut down on the evaporation that you are likely to get if you use a rain barrel alone which means more water for your sprinkler system.
If you want to you can invest about 10 dollars into a timer for your rain barrel sprinkler system. You can get a timer at your local hardware store or home improvement store and they are really great to have if you are a busy person. The timer will shut the water off at a certain time so you do not have to worry about turning the water off. Some timer controls even allow you to setup a clock so it can turn the sprinkler system off and on at a set time each day. That is the last step you have to do in order to transform that simple rain barrel into a sprinkler system. This will save you money on your electric and water bills and it will also help you convert unused water into a useable sprinkler system. This whole project should take you less than one hour to install and will provide you with years of joy and entertainment. The rain barrel sprinkler system is also very nice because no wiring is involved and there are little materials needed for the job.